Jumbotrac JT1 14'4" JT3 Height of wall is 10'0"

Height of wall is 10'0" and the finished width is 10'6" to allow for the hook/loop overlap and a little space to go around corners of your tent

It is generally used on larger traditional frame tent systems (30' wide/40'wide) where additional angeled braces are needed

845" in diameter and 12" or less in length

This is a replacement strap for the Canopy Jack 13'8"h and 10'10"h sizes

and thus not the best solution for field repairs where you cannot maintain pressure on the patch

Jumbotrac JT1 14'4" JT3 Height of wall is 10'0"This kedered aluminum tubing is used as an eave and ridge frame member in the Jumbotrac frame tent system. Each length of tubing is drilled with parallel 7 16" diameter through holes located 3" from each end of the extrusion for connection to a 3 8" Diam. push button. Specifications: Base Material: 4. 65" x 2. 06" JT1 Extrusion 6061 T6 Structural Aluminum Tubing, ID 1. 750", OD 2. 06", and a 0. 125" wall thickness Finish: Anodized Commercial Clear