Characterisation of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions Ingestion-build-93833 This document does not apply

This document does not apply to diving equipment and to positive pressure demand breathing apparatus

1 Characteristics from tensile test

Optical paths consisting of optical fibres and optical waveguides

special means against water vapour diffusion and water accumulation by air flow might be required

This standard is applicable to primary devices having an orifice plate used with flange pressure tappings

Characterisation of waste. Compliance leaching test. One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions Ingestion-build-93833 This document does not apply1 Scope This Technical Specification specifies a compliance test for routine testing providing information on the leaching of monolithic waste which can be obtained under the experimental conditions specified hereafter with a single batch leaching test at a specified liquid to surface area ratio (L A) of 12 (cm3cm 2). It applies to test portion of monolithic waste of regular shape, with a minimum dimension of 40 mm in all directions, obtained e. g. by