180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (26.0 mm OD, 101.6 mm CLR) Dimple Die

180 Degree Round Tube Die for 105 Standard Duty and Heavy Duty Tube and Pipe Bender (26.0 mm OD, 101.6 mm CLR) Dimple DieSpecs Outside Diameter of the Tubing (OD): 26. 0 mm Minimum Wall Thickness (DOM): 0. 065" (1. 7 mm) Minimum Wall Thickness (4130): 0. 065" (1. 7 mm) Minimum Wall Thickness (ERW): 0. 083" (2. 1 mm) Minimum Wall Thickness (Stainless): Contact for Details Minimum Wall Thickness (Aluminum): Contact for Details Minimum Wall Thickness (Other): Contact for Details Maximum Wall Thickness: 0. 134 (3. 4 mm) Centerline Radius: 4" (101. 6 mm) Maximum Degree of

Minimum Inside Radius: Approximately 40” (1016 mm)

All of our dimple dies are CNC-machined from the highest grade domestic materials available

000 PSI Air/Hydraulic Pump with Hose

Nominal Pipe Size (Diameter Nominal): NPS 1-1/4 (DN 30)

Angled Notches: 0-180 degrees

they graphically show up in the window on the right

SE provides those extra tools that you will need when you are concerned about setup and production times

40-120 PSI operating pressure

83 cubic inches oil/minute output

Outside Diameter of the Tubing (OD): 42

1-1/2" x 2" Rectangular - Hardway

100% Designed