Trail-a-Mate MARK II 1500kg 12V Exterior Lights

Trail-a-Mate MARK II 1500kg 12V Exterior LightsTrail A Mate MKII is a hydraulic caravan jack designed to lift larger and heavier caravans than the original Trail A Mate jockey wheel jack. The outside diameter is 60 mm. Requires 60 mm clamp to be purchased separately; used on the A frame. Does not fit standard 50 mm clamp. Easy to use being hydraulic, it takes very little effort to operate. Safety fully complies with the Australian mandatory safety standard AS 2693: 2007. 1 year warranty. Capacity:

Shipping Weight: 180 grams

Co-Axial Socket 75 ohm angle socket suitable for external fitting in white only

there is a different set to suit)

trailer sway can be deadly

Contains:1 x 10mm coil drinking water hose with fittings1 x Tap nut adaptor1 x 10m coil Sullage Hose 25mm1 x 10m 15 amp caravan lead1 x Small hose bag1 x Large hose bag1 x Electrical lead bag1 x Levelling ramp set1 x T Level

recommended to use only 20-25mm hose and fittings

3mm Breather holes will need to be drilled in the top surface

(Hose NOT included)

When camping

5W (depending on the specific diode configuration)

2000kg Rated

2 metres for connection to the tow vehicle and then compresses back to only 100mm long when disconnected